## Deep Reinforcement Learning Course v2.0

# Q-Learning, let’s create an autonomous Taxi 🚖 (Part 2/2)

## Chapter 2 of the Deep Reinforcement Learning Course v2.0

**We launched a new free, updated, ****Deep Reinforcement Learning Course from beginner to expert, with Hugging Face 🤗**

👉 Register here http://eepurl.com/h1pElX

**The chapter below is the former version**, the new version is here 👉 https://huggingface.co/blog/deep-rl-q-part2

**We launched a new free, updated, ****Deep Reinforcement Learning Course from beginner to expert, with Hugging Face 🤗**

👉 Register here http://eepurl.com/h1pElX

**The chapter below is the former version**, the new version is here 👉 https://huggingface.co/blog/deep-rl-q-part2

In the first part of this second chapter of this course, we** learned about the value-based methods and the difference between Monte Carlo and Temporal Difference Learning.**

So, in the second part, **we’ll study Q-Learning, and implement our first RL Agent: **a Q-Learning autonomous taxi that will need **to learn to navigate **in a city to** transport its passengers from point A to point B.**

This chapter is fundamental** if you want to be able to work on Deep Q-Learning **(chapter 3): the first Deep RL algorithm that was able to play Atari games and** beat the human level on some of them** (breakout, space invaders…).

So let’s get started!

# Introducing Q-Learning

## What is Q-Learning?

Q-Learning is an **off-policy value-based method that uses a TD approach to train its action-value function:**

*“Off-policy”*: we’ll talk about that at the end of this chapter.*“Value-based method”*: it means that it finds its optimal policy indirectly by training a value-function or action-value function that will tell us what’s**the value of each state or each state-action pair.***“Uses a TD approach”*:**updates its action-value function at each step.**

In fact, **Q-Learning is the algorithm we use to train our Q-Function**, an **action-value function** that determines the value of being at a certain state, and taking a certain action at that state.

The **Q comes from “the Quality” of that action at that state.**

Internally, our Q-function has **a Q-table, which is a table where each cell corresponds to a state-action value pair value. **Think of this Q-table as **the memory or cheat sheet of our Q-function.**

If we take this maze example:

The Q-Table (just initialized that’s why all values are = 0), **contains for each state, the 4 state-action values.**

Here we see that the **state-action value of the initial state and going up is 0:**

Therefore, Q-Function contains a Q-table **that contains the value of each-state action pair.** And given a state and action, **our Q-Function will search inside its Q-table to output the value.**

So, if we recap:

- The
*Q-Learning***is the RL algorithm that** - Trains
*Q-Function*, an**action-value function**that contains, as internal memory, a*Q-table***that contains all the state-action pair values.** - Given a state and action, our Q-Function
**will search into its Q-table the corresponding value.**

- When the training is done,
**we have an optimal Q-Function, so an optimal Q-Table.** - And if we
**have an optimal Q-function**, we**have an optimal policy,**since we**know for each state, what is the best action to take.**

But, in the beginning, **our Q-Table is useless since it gives arbitrary value for each state-action pair** (most of the time we initialize the Q-Table to 0 values). But, as we’ll **explore the environment and update our Q-Table it will give us better and better approximations.**

So now that we understood what are Q-Learning, Q-Function, and Q-Table, **let’s dive deeper into the Q-Learning algorithm**

## The Q-Learning algorithm

This is the Q-Learning pseudocode, let’s study each part, **then we’ll see how it works with a simple example before implementing it.**

**Step 1: We initialize the Q-Table**

We need to initialize the Q-Table for each state-action pair. **Most of the time we initialize with values of 0.**

**Step 2: Choose action using Epsilon Greedy Strategy**

Epsilon Greedy Strategy is a policy that handles the exploration/exploitation trade-off.

The idea is that we define epsilon ɛ = 1.0:

*With probability 1 — ɛ*: we do**exploitation**(aka our agent selects the action with the highest state-action pair value).- With probability ɛ:
**we do exploration**(trying random action).

At the beginning of the training, **the probability of doing exploration will be very big since ɛ is very high, so most of the time we’ll explore.** But as the training goes, and consequently our **Q-Table gets better and better in its estimations, we progressively reduce the epsilon value** since we will need less and less exploration and more exploitation.

**Step 3: Perform action At, gets Rt+1 and St+1**

**Step 4: Update Q(St, At)**

Remember that in TD Learning, we update our policy or value function (depending on the RL method we choose) **after one step of interaction.**

To produce our TD target, **we used the immediate reward Rt+1 plus the discounted value of the next state best state-action pair **(we call that bootstrap).

Therefore, our Q(St, At) **update formula goes like this:**

It means that to update our Q(St,At):

- We need St, At, Rt+1, St+1.
- To update our Q-value at this state-action pair, we form our TD target:

We use Rt+1 and to get the **best next-state-action pair value,** we select with a greedy-policy** (so not our epsilon greedy policy)** the next best action (so the action that have the highest state-action value).

Then when the update of this Q-value is done. We start in a new_state and select our action **using our epsilon-greedy policy again.**

**It’s why we say that this is an off-policy algorithm.**

## Off-policy vs On-policy

The difference is subtle:

*Off-policy*: using**a different policy for acting and updating.**

For instance, with Q-Learning, the Epsilon greedy policy (acting policy), is different from the greedy policy that is **used to select the best next-state action value to update our Q-value (updating policy).**

Is different from the policy we use during the training part:

*On-policy:*using the**same policy for acting and updating.**

For instance, with Sarsa, another value-based algorithm,** it’s the Epsilon-Greedy Policy that selects the next_state-action pair, not a greedy-policy.**

## An example

To better understand this algorithm, let’s take a simple example:

- You’re a mouse in this very small maze. You always
**start at the same starting point.** - The goal is
**to eat the big pile of cheese at the bottom right-hand corner,**and avoid the poison. - The episode ends if we eat the poison,
**eat the big pile of cheese or if we spent more than 5 steps.** - The learning rate is 0.1
- The gamma (discount rate) is 0.99

The reward function goes like this:

**+0:**Going to a state with no cheese in it.**+1:**Going to a state with a small cheese in it.**+10:**Going to the state with the big pile of cheese.**-10:**Going to the state with the poison and thus die.

To train our agent to have an optimal policy (so a policy that goes left, left, down). **We will use the Q-Learning algorithm.**

**Step 1: We initialize the Q-Table**

So, for now, **our Q-Table is useless**, we need** to train our Q-Function using Q-Learning algorithm.**

Let’s do it for 2 steps:

**Step 2: Choose action using Epsilon Greedy Strategy**

Because epsilon is big = 1.0, I take a random action, in this case I go right.

**Step 3: Perform action At, gets Rt+1 and St+1**

By going right, I’ve got a small cheese so Rt+1 = 1 and I’m in a new state.

**Step 4: Update Q(St, At)**

We can now update Q(St, At) using our formula.

STEP 2:

**Step 2: Choose action using Epsilon Greedy Strategy**

**I take again a random action, since epsilon is really big 0.99** (since we decay it a little bit because as the training progress we want less and less exploration).

I took action down.** Not a good action since it leads me to the poison.**

**Step 3: Perform action At, gets Rt+1 and St+1**

Because I go to the poison state,** I get Rt+1 = -10 and I die.**

**Step 4: Update Q(St, At)**

Because we’re dead, we start a new episode. But what we see here, is that **with two explorations steps, my agent became smarter.**

As we continue to explore and exploit the environment and update Q-values using TD target,** Q-Table will give us better and better approximations. And thus, at that end of the training, we’ll get an optimal Q-Function.**

We’re now ready to implement our first RL agent,

# Let’s train our Q-Learning Taxi agent 🚕

Now that we understood the theory behind Q-Learning,** let’s implement our first agent.**

The goal here is to train a taxi agent **to navigate in this city to transport its passengers from point A to point B.**

Our environment looks like this, i**t’s a 5x5 grid world,** our taxi is spawned randomly in a square. The passenger is **spawned randomly **in one of the 4 possible locations (R, B, G, Y) and **wishes to go in one of the 4 possibles locations too.**

Your task is to **pick up the passenger at one location and drop him off in its desired location **(selected randomly).

**There are 6 possible actions,** the actions are deterministic (it means the one you choose to take is the one you take):

The reward system:

Why we set a -1 for each action?

Remember that the goal of our agent is to maximize its expected cumulative reward, **if the reward is -1, its goal is to have the minimum amount possible of negative reward** (since he wants to maximize the sum), so it will **push him to go the faster possible.** So to take the passenger from his location to its destination as fast as possible.

For this part, you can follow the notebook **every is explained step by step**, or watch the video version of the course **where we’ll implement it step by step.**

So let’s start,

So that’s all for today. Congrats on finishing this chapter!

**You’ve just implemented your first RL agent,** an autonomous taxi that is able to navigate in this city to transport its passengers from a random point A to a random point B. **That’s amazing!**

Take time to grasp the material before continuing. In the third chapter, **we’ll study Deep Q-Learning, and implement our first Deep RL Agent **that will learn to play Space Invaders.

If you liked my article, **please click the 👏 below as many times as you liked the article** so other people will see this here on Medium. And **don’t forget to follow me on Medium, on ****Twitter****, and on ****Youtube****.**

See you next time,

Keep learning, stay awesome,

## Deep Reinforcement Learning Course v2.0:

Chapter 1: Introduction to Deep Reinforcement Learning